Research of Li-B alloy as cathode material of Li/SOCl2
battery |
WEI Jun-hua et al |
(4) |
Rate capacity prediction for Li-ion battery using Peukert
law |
ZHANG Ya-kun et al |
(8) |
Effect of sodium sources on performance of P2-Na2/3Ni1/3Mn2/3O2 |
CHEN Sen et al |
(12) |
Preparation and electrochemical performance of V2O5
foaming material |
LI Ning et al |
(16) |
Performance of graphite/LiFePO4 Li-ion battery
after high temperature storage |
CHANG Li-juan et al |
(20) |
Nail penetration test for lithium iron phosphate power
Li-ion battery |
JIN Biao et al |
(23) |
Forecast method of corrosion behavior on aluminum
laminated film of Li-ion battery |
LIU Ya-ming et al |
(27) |
Regulating the gelling time of colloidal electrolyte |
SUN Xiao-xiang et al |
(31) |
Effect of ethylene glycol bis(propionitrile) ether on
high-voltage Li-ion battery |
HONG Kun-guang et al |
(35) |
Effect of aluminum foil coating carbon on performance of
LiFePO4/C battery |
MA Shou-long et al |
(39) |
Thermal performance of electric vehicle battery group |
CUI Zhan-ping et al |
(43) |
Brief analysis of safety protection in battery testing
laboratory |
ZHU Xia-yu et al |
(46) |
Research progress in anode catalyst for direct ethylene
glycol fuel cell |
ZHAO Ya-fei et al |
(48) |
Research progress in recycling of spent power Li-ion
battery |
LI Xiao-xiao et al |
(52) |
Research progress in the preparation of nickel hydroxide
material |
LV Xiang et al |
(56) |
Research progress in vanadium pentoxide materials for
supercapacitors |
WAN Hui et al |
(60) |
Instructions for authors |
(64) |
News in brief |
(7,11,19,30,34,51,55,63) |